Mircom TX3 Series Quick Start Manual download pdf (Page 130)

130 (226) TX3 Configuration and Administrator Manual Version 4.3.1

Configuring a Telephone Access System Panel

Set Date and Time. Selecting this option lets you set the panel clock to a

time other than the PC clock. Every time you access the Set Date and Time

window the current PC time appears.

Figure 86. Set New Date and Time

Enable Daylight Savings Time. Select this check box to enable daylight

saving time. When enabled provide the daylight savings start and end time

for the local area.

Adjust panel time for. Provide a value to compensate for the daily drift

away from the true time.

3. Click OK to save the information and return to the configuration window,

or click Cancel to exit without saving the changes.

4. Click Send and Exit from the Tool Bar to apply the settings and exit

the session.

5.2 Configuring Inputs

Inputs 1 to 5 are assigned specific functions. Inputs 1 to 3 have pre-defined

functions and connect to specific devices. Inputs 4 and 5 are general purpose

inputs that can be manually assigned (correlated) to activate a general purpose

output.

The application autosenses the on/off status of connected components. In order

to accurately monitor the functional state of the panel inputs, you must first

define the electrical circuit characteristics of the input.

5.2.1 Inputs 1 to 5

Inputs 1 to 5 are designated as follows:

Input 1. Input 1 connects to the Postal Lock. Activation of this input unlocks the

main door and starts the main door timer. The door locks when the timer expires

or when the door sense input is activated. Daily usage is limited according to a

pre-defined amount. Any attempt to use the postal lock beyond this point causes

1 2 ... 125 126 127 128 129 130 131 132 133 134 135 ... 225 226

No comments

Mircom TX3 Series Quick Start Manual Page 130