110 (165) TX3 Configuration and Administrator Manual Version 2.4
Copyright 2012 LT-995
Configuring a Telephone Access System Panel
Input 5. Input 5 is a general purpose input that, when configured, activates a
general purpose output to perform any required function.
To configure inputs
1. Select Inputs/Outputs. The Inputs/Outputs Configuration window
appears.
Figure 79. Input Configuration
2. Click Inputs. A list of the panel inputs appears.
3. Select an input and provide information for the following parameters:
Label. Use this text box to provide a label name for this panel input. This
information is not stored in the panel and reverts to the state when a Job is
retrieved from the panel.
Assigned to. Assigned to contains a drop-down list of all assigned
inputs. This option is read only on Telephone Access System panels.
Active state. Active state specifies the state by which it is
considered active. Two selections are presented. Select one of the
following:
Open
Close
Circuit supervision. Circuit supervision specifies the circuit
type and indicates whether the input is supervised. Select one of the
following:
None
Open circuit
Comments to this Manuals