Mircom TX3 Series Quick Start Manual download pdf (Page 134)

134 (165) TX3 Configuration and Administrator Manual Version 2.4

Configuring a Card Access System Panel

To configure outputs

1. Select Inputs/Outputs. The Inputs/Outputs Configuration window

appears.

Figure 96. Output Configuration

2. Click Outputs. A list of the panel outputs appears.

3. Select an output and provide information for the following parameters:

Label. Use this text box to provide a label name for this panel input.

Assigned to. Assigned to designates the output to a specific controller

function. From the list select one of the following controller functions.

Reader A lock.

Reader B lock.

Reader A handicap.

Reader B handicap.

General Purpose.

Active state. Active state specifies the state by which it is

considered active. Two selections are presented. Select one of the

following:

Energized. When the device is energized it is considered to be active.

De-energized. When the device is de-energized it is considered to be

active.

4. Click Add to add the panel and return to the configuration window, or

click close to exit without saving the changes.

1 2 ... 129 130 131 132 133 134 135 136 137 138 139 ... 164 165

No comments

Mircom TX3 Series Quick Start Manual Page 134