Mircom TX3 Series User's Guide download pdf (Page 27)

Configuration

Version 2.2

Telephone Access System Programming Manual

27 (60)

To set the Clock Adjustment function

1. Press the arrow to scroll to “Clock Adjustment” and press the telephone

(enter) key. The “Clock Adjustment” entry appears.

2. Press the up and down arrow keys to increase the adjustment or the down

arrow key to decrease the adjustment. The range is -15 to 15 seconds and

the default is 0.

3. Press the telephone (enter) key to accept.

4. Press info key to return to previous menu.

2.6.21 Elevator Rest Timer

The “Elevator Restriction Timer” function lets you define the elevator access

time.

The elevator restriction cabinet houses up to 96 Form C type relay contacts.

These relay contacts are normally connected to the input circuits of the elevator

manufacturer’s button controller. When a resident releases the door, a designated

relay is energized to signal the elevator button controller to enable a particular

floor select button on the elevator and disable all others.

The elevator is restricted to stop only on the selected floor. The time period for

these relays to remain in an energized state depends on the assigned timer period.

Note: Each elevator restriction cabinet can have only one common timer.

The timer range is 5 to 600 seconds, with 60 seconds as the default.

To set the Elevator Restriction Timer function

1. Press the arrow key to select the “Elevr Rest Tmr” and press the telephone

(enter) key. The “Elevr Rest Tmr” entry appears.

2. Press the up and down arrow keys to scroll through the numbers. The

range is 5 to 600 seconds and the default is 60 seconds.

3. Press the telephone (enter) key to accept the number in view.

4. Press info key to return to previous menu.

Clock adjustment

[ 000 ]

Elev Rest Timer

[ 060 ]

1 2 ... 22 23 24 25 26 27 28 29 30 31 32 ... 59 60

No comments

Mircom TX3 Series User's Guide Page 27