Mircom TX3 Series User's Guide download pdf (Page 35)

Configuration

Version 2.2

Telephone Access System Programming Manual

35 (60)

Table 1: List of Screens

Database Menu NSL

System

ADC

System

Explanation/Description

Enter Apt#

[_ _ _ _]

YES YES Enter the resident’s apartment number (up to 8 digits).

Enter Dial Code

_ _ _ _

YES YES Enter the resident’s dial code (up to 4 digits).

Main Door sec. code

[_ _ _ _]

YES YES Enter a series of up to 4 digits from 0 to 9 to replace the

main door DTMF key (see section 2.6.3) for the specific

resident. To open the Main Door, the resident enters the

Main Door Security code followed by the # key. DO NOT

select “4”. This is used to refuse entry or disconnect. Do

not select the number that you are using for Call Wait

Key (2.6.14 Call Wait Key on page 24).

Aux Door sec. code

[_ _ _ _]

YES YES Enter a series of up to 4 digits from 0 to 9 to replace the

auxiliary door DTMF key (see section 2.6.4) for the

specific resident. To open the Auxiliary Door, the resident

enters the Auxiliary Door Security code followed by the #

key. DO NOT select “4”. This is used to refuse entry or

disconnect. Do not select the number that you are using

for Call Wait Key (2.6.14 Call Wait Key on page 24).

Enter Resident Name YES YES Enter the resident’s name. The name must be unique and a

maximum of 15 characters.

Line In Use

[x] Line 1 - 5

YES YES Enter the speech path for resident to communicate to the

ADC line or to a relay control unit. Line 1 is default. Use

arrow keys to scroll and press # or * to make a selection.

Enter Phone number

[____________]

N/A YES Enter the resident’s telephone number (up to 18 digits

including a comma that is used as 1 second delay). Use the

up arrow key for a comma (1 second pause) and the down

arrow key for a semi-color (3 second pause). Press Enter

(telephone key) to accept the telephone number.

Enter Relay Code

[_ _ _ _]

YES N/A Enter the resident’s assigned relay code (NSL only).

Note: Relay codes start at 1 for the first relay, up to 1535.

Enter Keyless Code

[_ _ _ _]

YES YES Enter the assigned keyless code, up to 6 digits (if used). See

below for using keyless entry codes.

Keyless Code Corr

[x] Main door relay

[ ] Aux door relay

YES YES Select which door (main, auxiliary or both) can be opened

by the resident using a keyless code.

Use arrow keys to scroll and press # or * to make a

selection.

Enter Elev Rest Addr

[_ _]

YES YES Enter the ID (or address) of the Elevator Restriction

controller for the resident.

Enter Elev Rest Code

[_ _]

YES YES Enter the elevator restriction relay number for the resident.

Hide Display

[x] Display

YES YES This feature turns the resident information display ON or

OFF. When OFF the resident’s information is only

displayed in configuration mode. Use arrow keys to scroll

and press # or * to make a selection.

1 2 ... 30 31 32 33 34 35 36 37 38 39 40 ... 59 60

Comments to this Manuals

No comments

Mircom TX3 Series User's Guide Page 35

Comments to this Manuals

Related products and manuals for Door intercom systems Mircom TX3 Series