Mircom FA-300 Series Installation Manual download pdf (Page 45)

FA-300 Series LCD Version Installation and Operation Manual

Command Menu

The main command menu is pictured below. The first line of the LCD will always show

“-Command Menu-“, and the second line scrolls through different selections. Use the “UP” and “DOWN” keys to

scroll through the menu, and press the “ENTER” key to make a selection. To exit from the main command menu,

select the “Exit” menu option and then press either the “CANCEL” or “ENTER” key.

Pressing “LAMP TEST” at any time will show information about the system and the software version as shown

below. It will also illuminate all the LEDs across the top of the display except for the CPU Fail LED.

The first line shows the model number and panel type and the second line shows the software version number. The

version of the software is read as Major.Minor.Revision.

Note: Command Menu features 1 and 9 can only be accessed if jumper JW5 is placed on the main board,

see Table 1.

-Command Menu-

1. FA-300 Config

2. Config Info

3. Set Time

4. Set Password

5. View EventLog

6. Clear EventLog

7. Walk Test

8. I3 Loop test

9. Dialer Config

10.Test Dialer

11.Bypass Det Ckt

12.Bypass NAC Ckt

13.Aux Disc

14.Exit

FA-301-12DDR wUDACT

Version 0.0.4

1 2 ... 40 41 42 43 44 45 46 47 48 49 50 ... 83 84

No comments

Mircom FA-300 Series Installation Manual Page 45